igutex® TX3 | Fiber composite plain bearings for high load applications


Typical applications

Máquinas agrícolas
Máquinas de construção
Maquinaria pesada/Construção de fábricas

Here you can find further applications:
Soluções industriais

 

When do I need it? If very high static loads occur permanently For heavy duty swivel applications When temperature resistance and media resistance are required in addition to very high load capacity

When do I not need it? When loads below 100 MPa occur iglidur® G, casquilho autolubrificado sem flange, mm iglidur® Q2, casquilho autolubrificado sem flange, mm iglidur® Q, casquilho autolubrificado sem flange, mm For rotary motion in continuous operation iglidur® W300, casquilho autolubrificado sem flange, mm iglidur® Z, casquilho autolubrificado sem flange, mm iglidur® G, casquilho autolubrificado sem flange, mm For high temperature, medium load applications iglidur® X, casquilho autolubrificado sem flange, mm iglidur® J350, casquilho autolubrificado sem flange, mm

Utilize as nossas opções de filtro para encontrar o produto adequado

Tolerances and measuring system
The installation dimensions and tolerances of the igutex® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Métodos de teste

Assembly
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - montagem, colagem, maquinagem